HOW-TO: Mvision FCIS9080 net

#1
mnet from USB
=============

- mnet.cfg file from USB
Go to Installations, network, IP Setup
Press red key "mnet.cfg". The "mnet.cfg file will be loaded directly from USB
Refer to mnet.cfg file sample for more info


mnet from network howto
=======================

- mnet.cfg file from network
Go to Installations, network, IP Setup
Press blue key "mnet URL" and input the Internet or local network address where mnet.cfg file is located
You can use arrow keys to select characters and you can enter numbers directly pushing the numbers at RCU
FAV key is "." and SAT key is delete
Press yellow key "download". The "mnet.cfg" file will be loaded directly from Internet
This should be specially useful for 9080NET users, without USB. This way the can install big mnet.cfg files
just setting manually IP data and reading the whole mnet file from network


* Save softcam.key from NET to USB
==================================
For MV (PVR) models, if you have an USB stick plugged when you get keys from Internet, a file copy named softcam.key will be saved to USB stick


* NET keys howto
================

- softcam.key keys (file name is softcam.key)
Go to "smartcard", "keys editor"
Press blue key "Keys URL" and input the Internet or local network address where softcam.key file is located
You can use arrow keys to select characters and you can enter IP numbers directly pushing the numbers at RCU
FAV key is "." and SAT key is delete
You'll find a softcam file at: http://www.gxmax.com/net/softcam.net, or use your own one
Press yellow key "NETKeys". The "softcam.key" file will be loaded directly from Internet

- Direct softcam download from NET, without entering any menu. Just press GREEN key (POSITION key, if using universal RCU)